Our 2013 Fall Meeting of the NEKDA is being held jointly with the Keystone Kiln Drying Association on Wednesday and Thursday November 13 and 14 in Elmira, NY! Please see below for program and registration information. For information and ideas for future meetings please contact a NEKDA Officer or Board Member with suggestions.
Spring 2012 Holiday Inn in Danbury, CT on
Thursday and Friday, April 19-20
Your Board of Director’s has again put together an excellent meeting program, with interesting and important topics for kiln operators and managers. We have also arranged a particularly special opportunity for a very interesting and worthwhile plant tour on Thursday morning of Steinway Piano, folks to whom you will find that kiln drying quality is especially meaningful. Because of parking and other logistical issues we will travel from Danbury to Steinway using a charter bus. Further information on Steinway can be found at http://www.steinway.com, and several interesting videos, including items we will be see on our tour, are on youtube at http://www.youtube.com/watch?v=jAInt7hIZlU&feature=related.
Our Kiln Operator’s Workshop, technical program and banquet will be at the Danbury, CT Holiday Inn, which is conveniently located shortly off exit 8 of I-84. From exit 8 head to the south on Route 6 (Newton Road) for about ½ mile where you will see the hotel on the right hand side. Further detail can be found at www.danbury-hi.com/directions.html.
We have obtained an excellent room rate of $89 s/d, including hot breakfast, and suggest that you call and make your reservations promptly (203/792-4000); our room block and this rate are being held till April 4. Be sure to tell them that you are with the NEKDA to receive our group rate.
Please mail your preregistration form (enclosed) and check directly to Bill Smith promptly (to be received by April 11). Note the $15 per person surcharge for late registration. Call 315/470-6832 or 6880, or email to firstname.lastname@example.org with questions; fax to 315/470-6879. Also, please note that tour participants are required to preregister.
"NEKDA, always the Best Kiln Drying"
Thursday April 19
Thursday Plant Tour (Tour bus loads outside the Holiday Inn at 7:30, preregistration required)
Steinway Piano Company,
1 Steinway Place
Long Island City, NY
Bus leaves the Holiday Inn at 7:30 am
Henry Engelhard Steinway, a German immigrant and master cabinetmaker, founded Steinway and Sons in 1853. Today, the Steinway name is practically synonymous with "piano." Composed of over 12,000 parts, a single Steinway piano takes 300 skilled craftsmen a full year to be build. As 70% of a Steinway is wood, tour participants will have opportunity to observe the application and value of high quality kiln drying. This is a tour which should not be missed.
at the Holiday Inn
1:45 – 2:00 REGISTRATION (lunch will be at Steinway)
WELCOME and INTRODUCTIONS, Wayne Cate, NEKDA President (H.G. Wood Industries, Bath, NH)
2:00- 5:00 “KILN OPERATOR'S CLINIC” - led by Bill Smith and Peter Garrahan, participation by all. Informal and practical instruction and discussion on such things as the basics of kiln operation, maintenance, stacking, DH, conventional, and high-temperature drying, stain and discoloration, scheduling, changing species, wood-moisture fundamentals, kiln loading and baffling, moisture meters, restarting kilns, drying degrade, etc. Bring your individual problems, questions, and solutions! Please note any particular interests for discussion at the clinic on your registration form.
3:15 - 3:30 REFRESHMENT BREAK
5:00 – 6:00 STRESS RELIEF
6:00 BANQUET, Industrial Awards
NEKDA, always the Best Kiln Drying
Friday April 20
at the Holiday Inn
7:00 - 7:45 BOARD OF DIRECTORS MEETING
7:45 - 8:00 REGISTRATION AND COFFEE
8:00 - 8:05 Welcome and Introductions
Wayne Cate, NEKDA President (H.G. Wood Industries, Bath, NH)
Moderator: Brian Hughes, NEKDA 1st Vice President (Wagner Hardwoods, Cayuta, NY)
8:05 - 8:45 Wood Moisture Meters- Tools & Accessories to Enhance Use
Paul Laurenzi, Delmhorst Instrument, Towaco, NJ
8:45 – 9:45 Current Issues with Emerald Ash Borer, Asian Longhorn Beetle and Various other Wood Insects and Pathogens
Scott Myers, USDA APHIS, Buzzards Bay, MA
9:45 - 10:00 COFFEE BREAK
Moderator: Dave Nichols, NEKDA 2nd Vice President (Technical Services, Claremont, NH)
10:00 – 11:00 Tools for Troubleshooting Kiln Drying Problems
Luiz Oliveira, FPInnovations, Wood Products Div., Vancouver, BC
11:00 – 11:45 Quality Control – An End-User’s Perspective
Harry Harrinandan, Steinway Piano, Long Island city, NY
11:45 – 12:30 Optimizing Boiler Efficiency and Compliance
David Nichols, Technical Services, Claremont, NH
12:30 - 1:00 LUNCHEON BUFFET
In these tough economic times it is important to remember that:
Wood is the premier material for manufacturing, building and construction. It is renewable, and produced from a sustainable natural resource. It is strong, lightweight, economical, long lasting and attractive, and is made into countless products desired by society. It is also best used when it has been properly and effectively kiln dried. Because sustained profitability and competitive advantage in the marketplace is most assured by quality kiln drying, we encourage you to participate in NEKDA meetings. The NEKDA Officers and Board of Directors look forward to seeing you in April!