Department of Chemical Engineering
The Department of Chemical Engineering Safety Committee exists to promote and maintain a safe environment for students, faculty and staff in and around CHE Department buildings.
A safe environment requires cooperation from everyone on a continuous basis. Therefore, we welcome input and feedback from everyone to continue to provide a safe learning and working environment. If you notice a potentially unsafe situation or have safety related feedback for us, please contact any committee member listed below or send an email to email@example.com. Thank you!
Department Safety Orientation & Training
The Major Professor/Supervisor is responsible for ensuring their students and/or new department members that will be engaged in laboratory exercises receive proper documented training. Orientation and training must be completed before laboratory access is allowed. Print out the current Safety Training Form and follow the instructions below:
- Arrange as soon as possible through the Safety Committee Chair, Mr. Appleby (firstname.lastname@example.org, x6527, 114 Walters), to receive safety training by ESF Environmental Health and Safety personnel. In the absence of Mr. Appleby, contact Mr. Westby (email@example.com , x4952, 416 Walters). Have Mr. John Wasiel or Mr. Peter Vandemark sign your Training Checklist form.
- Have your new department member become familiar with this website's content.
- Have your new department member become familiar with the SUNY-ESF Environmental Health and Safety's website's content at ESF Environmental Health and Safety.
- Have your new department member view the video entitled To Be (Safe) or Not to Be found in the following link to the University of California, San Diego http://blink.ucsd.edu/safety/research-lab/laboratory/videos.html. Scroll down the available videos (the last one) and click on the link to this 8:47 minute video; Be prepared to take a short quiz based on this video.
- Have your new occupant arrange to meet with a Safety Committee member (typically Mr. Westby) to take the quiz based on the video, review safety resources available on this website and on the SUNY-ESF Environmental Health and Safety's website to obtain appropriate signatures.
- Give the completed Training Checklist form to our department secretary, Lynn MicKinkle in Walters 205.
Department Member Personal Protective Equipment (PPE) Compliance
Eye protection, in particular, must be worn at all times when working in a laboratory or around the pilot plant during operations. Every member of the PBE Department is empowered to escort anyone not wearing appropriate PPE out of the area. Any infraction must then be documented by sending an email to firstname.lastname@example.org and copy the Primary Contact (listed just outside the laboratory door on the HASP sign). See the Department PPE Procedure.
Department Safety Policies
Forms and Procedures
- Safety Related Forms
- Checkout Form 9 Supplement
- Card/FOB Access Request Form (for common laboratories)
- Key Access Request Form (for research group laboratories)
- Safety Procedures and Documents
- PPE Procedure
- Safety Training Overview
- Developing a PBE Standard Operating Procedure (SOP)
- Begin with a risk assessment of your lab operation/procedure using one or both of these tools: PBE SOP Risk Assessment Tool 1 and/or PBE SOP Risk Assessment Tool 2.
- Should your risk assessment indicate an SOP is necessary, then use this PBE SOP Template and submit the SOP to the PBE Safety Committee for review and as the Department SOP repository.
- Additional SOP guidelines and resources